Dr.V.Vidyashree Nandini

Dr.V.Vidyashree Nandini, MDS, DNB

Professor and Head of the Department
Name V.Vidyashree Nandini
Designation Professor and Head of the Department
Under Graduation College & Year B.D.S., 1994, M R A Dental College and Hospital, Bangalore
Post Graduation College & Year M.D.S.,DNB., MAMS 1999, M R A Dental College and Hospital, Bangalore
Teaching Experience 24 Years
Expertise Prosthodontics- Implantology, Aesthetic Dentistry, Maxillofacial Prosthodontics, Full mouth Rehabilitation, Laser Dentistry
Area of Interest -
No. of Publications 67
SCOPUS ID 15022995100
ORCID ID 0000-0002-4439-7957
  • First DNB in India
  • Best paper Award in 42nd IPS conference, 2015
  • Dr APJ Abdul Kalam Lifetime Achievement National Award, for Teaching, Research and Publications, 2022
  • Outstanding Academician in Prosthodontics
  • Global Outreach Healthcare Award 2023
  • Comparison of Retention of Two Different Attachment Systems Used in Implant-Supported Overdentures. J Pharm Bioallied Sci. 2022 Jul;14(Suppl 1):S605-S610.
  • Aesthetic Perception of Patients and Dentists on Conventional and Characterized Complete Dentures. J Pharm Bioallied Sci. 2022 Jul;14(Suppl 1):S611-S615.
  • A Clinical Study to Assess the Severity of Periodontal Disease in Relation to Glycemic Status of Type II Diabetic Individuals. J Pharm Bioallied Sci. 2022 Jul;14(Suppl 1):S356-S359.
  • Evaluating the Effect of Tideglusib-Loaded Bioactive Glass Nanoparticles as a Potential Dentine Regenerative Material. Materials (Basel). 2022 Jun 29;15(13):4567.
  • Biomineralized Limpet Radular Teeth as Functionalized Biofillers in Experimental Dental Composite Resin. World J Dent 2022;13(3):201-206.
  • Perception and knowledge of augmented reality in prosthodontics among postgraduates and interns in Tamil Nadu. Journal of Orofacial Rehabilitation. 2022; (2),12-19
  • Evaluation of bacterial penetration through the implant-abutment interface following placement of implant supported cement retained and screw retained metal crowns: an in-vitro study. IJBPAS, January, Special Issue 2, 2022, 11(1): 241-253.
  • Marginal and Internal Gap of Metal Copings Fabricated Using Three Types of Resin Patterns with Subtractive and Additive Technology: An In Vitro Comparison. Materials 15 (18), 6397 – 2022
  • Attitude and practice of disinfection protocol for different impression materials among practicing dentists in Tamil Nadu - A cross sectional survey. Journal of Orofacial Rehabilitation 2 (2), 2-11 -2022
  • Influence of titania nanotubes diameter on its antibacterial efficacy against periodontal pathogens: An In vitro analysis. Journal of Pharmacy & Bioallied Sciences. 2021 Jun;13(Suppl 1):S284.
  • Comparative evaluation of accuracy of digital and conventional impressions and internal fit of zirconia copings fabricated from digital and conventional impressions: An invitro study. International Journal of Dental Science and Innovative Research.2021;4(5),184-93.
  • Enamel Wear of Teeth against Polished and Glazed Monolithic Zirconia crowns at 3 and 6 months: A Clinical Study. International Journal of Current research and Review. 2021;13(18),8-15.
  • Customized Gingival Retraction Cord using Additive Manufacturing: A Novel Technique. International Journal of Current research and Review.2021;13(16), 84-7.
  • Study to Evaluate the Level of Awareness about the Association between Diabetes and Periodontal Health in diabetic Individuals- A Questionnaire based Study. Annals of the Romanian Society for Cell Biology.2021;25(6),10285-93.
  • Comparative Evaluation of Mechanical properties of Titanium Dioxide Nanoparticle Incorporated in Composite Resin as a Core Restorative Material. The Journal of Contemporary Dental Practice.2021;22 (6), 686-690
  • Evaluation of the Effect of Pudhina Mouthwash on Surface Characterisation of Nickel Titanium Archwires Used in Orthodontics- An invitro study. Annals of the Romanian Society for Cell Biology. 2021;25 (6), 4696-702
  • Customized Periodontal Probe for Measuring Pressure Changes During Peri Implant Displacement: A Novel Design. Journal of Prosthodontics Dentistry 2021;16;1: 41
  • Evaluation of Efficacy of Pudina Extract (Mentha Arvensis) on Candida Albicans and Lactobacillus Acidophilus – An Invitro Study. Annals of the Romanian Society for Cell Biology.2021;25 (3),7505–11.
  • Safety of Noni mouthwash in Orthodontic patients - An Ion release study. Nat. Volatiles & Essent. Oils, 2021; 8(5): 11940-11948
  • Goethite Nanofibers as Bio-Fillers in Dental Composite Resin. Indian Journal of Forensic Medicine & Toxicology. 2020 Oct 1;14(4).
  • Current Bone Substitutes in Implant Dentistry. International Journal of Scientific Research. 2020;9 (12):16-8
  • The Realm of Patient Specific Implants(PSI) in Maxillofacial Prosthodontics: A Review. IOSR Journal of Dental and Medical Sciences (IOSR-JDMS).2020;19 (11):13-19
  • Radiation Prostheses: An Overview. International Journal of Dental Science and Innovative Research.2020;3 (4):84-93
  • Fabrication of PEEK crowns with improved esthetics – A Technique. Annals of Clinical Prosthodontics 2019;3(2):11-16.
  • Thermal Conductivity of Graphene incorporated heat activated Polymethylmethacrylate: A Pilot study. Journal of Prosthetic and Implant Dentistry 2019;3(1):51-56
  • Fabrication of an interim closed hollow bulb obturator prosthesis with frozen saline: A modified technique, J Clinical Prosthodontics and Implantology 2019;1(2):19
  • Aesthetic indicator for selection of maxillary anterior teeth: A study among the south Indian Population, International Journal of Dental Science and Innovative Research 2019;2(6):386-398
  • Management of Papillon-lefevre syndrome with a customized treatment plan to receive complete dentures – A case report with a two year follow up. International Journal of Scientific Research 2018;7(6):6-7
  • A Simple technique to assess vertical dimension of occlusion from anthrpometric measurements of digits in south Indian population. International Journal of Scientific Research 2018;7(6):135-138
  • Effect of Morinda citrofolia as storage solution on the surface roughness of heat cure acrylic resin – An invitro Study. International Journal of Scientific Research 2018;7(6):156-158.
  • A study on the incorporation of radiofrequency identification strips in implant and tooth supported over dentures for treatment information and denture identification. J NTR Univ Health Sci 2017;6:103-6
  • Knowledge, attitude and practice of denture adhesives use among private dental practitioners of kanchipuram city, Tamilnadu : a cross sectional survey. International Journal of Scientific research. 2017; 6(6):210-212.
  • Laminate handling Tool – A novel device. Karnataka Prosthodontic Journal 2017;1(3):36-9
  • Technique for fabrication of interim hollow bulb obturator in a patient with Class II Aramany’s defect. Karnataka Prosthodontic Journal 2017;1(3):6-12
  • Minimally invasive management of non-syndromic oligodontia in an adult – a case report. Karnataka Prosthodontic Journal 2017;1(3):31-5.
  • Assessment of Angle of Convergence of Prepared Tooth for Full Veneer Crown Clinically Using a Neoteric Tool. International Journal of Science and Research 2017; 6(4):590-92
  • Guide flange appliance for the management of mandibular deviation – A case report, Trends in prosthodontics and dental implantology 2016; 7( 2) : 29-31
  • Prosthetic management of malnourished infant with cleft palate using a feeding plate appliance– A Case report, Trends in prosthodontics and dental implantology 2016; 7( 2) : 32-35
  • A Study on the Awareness of Tobacco Cessation Services and Efforts to Quit Smoking among the Urban Males in an Urban Locality e-MIDAS 2016;3(4):9-12
  • A Simplified method of fabrication of custom ocular prosthesis for a patient with acquired defect – A clinical report, Trends in prosthodontics and implantology 2015; 6( 1) : 7 -9
  • Evaluation of speech for a patient with an extensive soft palate defect, before and after fabrication of obturator, Journal of scientific dentistry 2014 ; 4 (2): 34-39
  • Dual wash impression technique for recording impression of resorbed mandibular edentulous ridges, Midas J June 2015;2(2):16-7
  • Direct Metal Laser Sintering : A digitized metal casting technology. JIPS. Oct – Dec 2013;13(4):389-92.
  • Preliminary Impressions in Microstomia patients : An innovative technique – JIPS 2013;13;1:52-55
  • Comparison of the Dimensional accuracy and surface detail reproduction of different impression materials under dry and moist conditions – An in vitro study. International J Contemporary Dentistry 2012;3(2):47-55
  • Acetal resin – A quantum gap in aesthetic restorative dentistry- IJCDS; Nov 2011;2(4):56-59
  • Periapical radiolucency not requiring endodontic therapy : An unusual case – IJDR 2009 ; 20 (1) : 126 – 128.
  • Alginate impression – A practical perspective J Conservative dentistry 2008 : 11 (1):37-41
  • Zirconia post pressed ceramic core supported All ceramic crown – case reports and 4 yrs follow up – JIPS 2007, 07(4) : 199 – 02
  • Evaluation of bacterial contamination of dental unit water lines and efficacy of commercially available disinfectant – J Conservative Dentistry, SEPT 2006;9(3):93-98
  • Current concepts in the restoration of endodontically treated teeth – JIPS vol.6(2);2006:63-67
  • Comparative evaluation of hight tracer, Chandra tracer, intra oral tracer, function graph check bite - A clinical study JIPS – JAN 2005;5(1)26-32
  • Obstructive sleep apnea – A review, JIPS October 2002;2(3):33-6
  • A method of fabrication of an extensive facial prosthesis- Trends in Biomaterials and Artificial organs 2003;16(2):31-32
  • Denture Adhesives - Polydental Journal 1998; 1 (3):18-9
  • Making of Finger Prosthesis – Polydental Journal 1998; 1 (3):10-12
  • Impression materials and techniques used for complete denture fabrication amongst general practitioners – A Survey in and around Chengalpet District. Annals of clinical prosthodontics
  • Role of Prosthodontist in patient identification in forensic odontology – An Overview. Annals of clinical prosthodontics
  • Prosthetic rehabilitation of a maxillary defect caused by post covid mucormycosis using a two-part obturator: A case report. Journal of Orofacial Rehabilitation
  • Comparison of the color stability and flexural strength of dentures characterized using conventional auto-polymerizing resin stains and newer light cured composite staining material: An In-vitro study. RJPT
  • Rediscovering complete denture – Book on complete dentures.
  • Dental Laboratory Procedures: Fixed Partial Dentures
  • Exam Preparatory Manual for Undergraduates- Fixed Partial Dentures.
  • Covid 19 Pandemic : Dental implications and challenges
  • Book Chapter authored: Computer Engineered Chair-side Dental Ceramic restorations-2022
  • Occlusion in Implant Dentistry, Lambert Publications
  • Rapid Prototyping in Prosthodontics, Lambert Publications